$45.00
$20.00
$50.00
$40.00
$35.00
$25.00
$15.00
$45.00
$150.00
Includes throating of barrel and polishing frame feed ramp. Tuning of extractor and ejector with installation of Wolf spring kit. Complete disassembly and inspection.
$115.00
4- 4.5lbs trigger pull weight. Utilizes stock fire control components. Guns with stock mim parts may need sear or hammer replaced.
$295.00
3- 4 lbs pull weight. Includes match sear (EGW), hammer (C&S Tactical), disconnector(C&S), lightweight trigger (Fusion) and titanium hammer strut (STI).
$150.00
$110.00
Slight amount of play in slide to frame fit for reliability in carry guns.
$185.00
Does not include machining of frame for ramped barrel.
$165.00
$35.00
$65.00
$110.00
.220 radius is for Springfield and Caspian frames.
$60.00
Hand filed.
$110.00
$100.00
Hand filed and blended.
$80.00
Rear of trigger guard is undercut and and radiused to allow for a higher grip.
$45.00
Slide stop and frame pin hole are modified. ( Pictures in photo gallery)
$80.00
This narrow flat top gives the shooter a flat aiming surface directly in line with the front sight. Allows for faster front sight recognition. With this Flat top being narrow the slide profile is not drastically altered. (Picture in Photo Gallery)
$40.00
$35.00
$60.00
$35.00
$100.00
$30.00
$50.00
Does not include contouring and blending of mainspring housing to frame before stippling.
$75.00
May require an oversized firing pin stop to be installed to keep the extractor from clocking.
$120.00
May require an oversized firing pin stop to be installed to keep the extractor from clocking.
$40.00
$60.00
$20.00
$25.00
$45.00
Firing pin hole is also chamfered.
$55.00
$50.00
New hammer is fit to existing trigger components.
$150.00
Matte Black, FDE, Sniper Gray & Magpul O.D. Green. Other colors available for additional charge.
$150.00
Deep Flat Black, Flat Gray, O.D. Green. Other colors add $20.00
$50.00
Price for bare slide only.
$40.00
Slide Stop, Thumb Safety,Beavertail, Mainspring Housing, Barrel Bushing, Recoil Plug.
$80.00
It creates a matte finish referred to as French gray.
$60.00
Creates a dull gray on stainless steel.
Copyright © 2018 Combat Weapon Systems - All Rights Reserved.
All content is property of Combat Weapon Systems.